Vendor: Microsoft
Exam Code: 70-342
Exam Name: Microsoft Advanced Solutions of Microsoft Exchange Server 2013
Version: 14.81

QUESTION 91
The Internet link in the Tampa office will be unavailable during the weekend.
You need to ensure that all outbound email messages are sent from the Charlotte office during the planned outage.
What should you do?

A.    Modify the cost of the Tampa SMTP Send connector.
B.    Create a new mail exchanger (MX) record named SMTP2.fabrikam.com in the internal DNS zone.
C.    Modify the smart host of the Tampa SMTP Send connector.
D.    Modify the preference value of the fabrikam.com mail exchanger (MX) records.

Answer: C

QUESTION 92
Hotspot Question
You need to resolve the IRM template issue.
Which user right should you modify?
To answer, select the appropriate user right in the answer area.

Answer:

Explanation:
Uncheck Export (Save as) for Anyone (since it’s to prevent users, the Anyone export seems more applicable)

QUESTION 93
You need to recommend a solution for the HR voice mail. The solution must meet the security requirements.
What should you recommend?

A.    Create a UM mailbox policy and associate the policy to UM1.
Configure the voice mail protection settings of the UM mailbox policy.
Create an auto attendant and link the auto attendant to UM1.
B.    Create a UM mailbox policy and associate the policy to a new dial plan.
Configure the voice mail protection settings of the UM mailbox policy.
Create an auto attendant and link the auto attendant to the new dial plan.
C.    Create a UM mailbox policy and associate the policy to a new dial plan.
Configure the voice mail protection settings of the UM mailbox policy.
Assign the UM mailbox policy to the mailbox of the HR department.
D.    Create a UM mailbox policy and associate the policy to UM1.
Configure the voice mail protection settings of the UM mailbox policy.
Assign the UM1 mailbox policy to the mailbox of the HR department.

Answer: D
Explanation:
http://technet.microsoft.com/en-us/library/dd351041%28v=exchg.150%29.aspx

QUESTION 94
You need to recommend an Outlook protection rule solution to meet the technical requirements.
What should you recommend?

A.    Create an Outlook protection rule and filter the rule based on the FromDepartment property.
Apply the Do Not Forward protection template to the rule and enable the UserCanOverride setting.
B.    Create an Outlook protection rule and filter the rule based on the FromDepartment property.
Apply the Do Not Forward protection template to the rule and disable the UserCanOverride setting.
C.    Create an Outlook protection rule and filter the rule based on the SentTo property.
Apply the Do Not Forward protection template to the rule and disable the UserCanOverride setting.
D.    Create an Outlook protection rule and filter the rule based on the SentTo property.
Apply the Do Not Forward protection template to the rule and enable the UserCanOverride setting.

Answer: B
Explanation:

http://technet.microsoft.com/en-us/library/dd638178%28v=exchg.150%29.aspx

QUESTION 95
Hotspot Question
You plan to create two retention tags named Tag1 and Tag2. Tag1 will be used to move email messages to the Archive mailbox. Tag2 will be used to delete the email messages.
You need to identify which settings must be configured in the retention tags to meet the technical requirements.
How should you configure each retention tag?
To answer, configure the appropriate options for each retention tag setting in the answer area.

Answer:

QUESTION 96
Hotspot Question
You need to ensure that the HR1 group can perform the tasks required to meet the technical requirements.
To which group should you add HR1?
To answer, select the appropriate group in the answer area.

Answer:

Explanation:
http://technet.microsoft.com/en-us/library/dd351080%28v=exchg.150%29.aspx

QUESTION 97
You are evaluating the implementation of the planned static IP addresses for DAG1.
You need to identify the appropriate IP addresses for DAG1.
Which two IP addresses should you identify?
(Each correct answer presents part of the solution. Choose two.)

A.    169.254.0.10
B.    192.168.1.10
C.    192.168.2.10
D.    192.168.10.10
E.    192.168.20.10
F.    224.0.0.10

Answer: BD
Explanation:
192.168.1.10 and 192.168.10.10 for MAPI connection subnet.
192.168.2.10 and 192.168.20.10 routeable too and suitable for replication traffic.
The question however doesn’t state that you need a seperate replication network.
Therefore, B & D
http://technet.microsoft.com/en-us/library/dd638104%28v=exchg.150%29.aspx

QUESTION 98
Drag and Drop Question
The security department implements a new firewall between the IP-PBX system and the servers in the Tampa office.
You discover that SIP sessions cannot be established between the IP-PBX and EX1.
You need to identify which ports must be opened between the IP-PBX and the Exchange Server 2013 servers.
Which ports should you identify?
To answer, drag the appropriate port or ports to the correct group of servers in the answer area. Each port or ports may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.

Answer:

Explanation:
You can configure the TCP port that’s used to listen for Session Initiation Protocol (SIP)  requests on a Unified Messaging (UM) IP gateway. By default, when you create a UM IP gateway, the TCP SIP listening port number is set to 5060.
The Microsoft Exchange Unified Messaging service and the UM worker process use multiple Transmission Control Protocol (TCP) and User Datagram Protocol (UDP) service ports to communicate with IP gateways.
The Microsoft Exchange Unified Messaging service and the UM worker process use Session Initiation Protocol (SIP) over TCP.
By default, the Microsoft Exchange Unified Messaging service listens on both TCP port 5060 in Unsecured mode  and TCP port 5061 when mutual Transport Layer Security (mutual TLS) is used.
Each UM worker process that’s created listens on port 5065 and 5067 (unsecured) and 5066 and 5068 (secured).
But when an IP gateway or IP PBX sends Realtime Transport Protocol (RTP) traffic to the Speech Engine service  worker process, the IP gateway or IP PBX will use a valid UDP port that ranges from 1024 through 65535.
http://technet.microsoft.com/en-us/library/jj150516(v=exchg.150).aspx#ports

QUESTION 99
You have a hybrid deployment of Exchange Server 2013 and Microsoft Office 365. The Exchange Server organization has a mailbox size limit of 2 GB.
You need to provide engineers with the ability to retain certain email messages indefinitely.
The solution must meet the following requirements:

– Ensure that the engineers can access the retained email messages by using Outlook Web App.
– Ensure that the retained email messages do not apply to the mailbox size limit of the engineers.
– Minimize the storage requirements of the on-premises servers.

Which two actions should you perform?
(Each correct answer presents part of the solution. Choose two.)

A.    From Office 365, create Archive mailboxes.
B.    Instruct the engineers to create a personal folder.
C.    Create a retention policy.
D.    From the on-premises Exchange Server 2013 organization, create Archive mailboxes.
E.    Create a data loss prevention (DLP) policy.

Answer: AC
Explanation:
Option "A" appears to be the correct answer because it says:
"Minimize the Storage Requirements of the On-Premises Servers"
The correct answers should be A. & C.
A. From Office 365, create Archive Mailboxes 
C. Create a Retention Policy.
If you select option D. as it was answered in the dump, then you are not meeting the requirements: 
Minimize the Storage Requirements of the On-Premises Servers
C:

D:
In Exchange Server an archive mailbox is a second mailbox provisioned for a user that is separate to their primary user mailbox.

QUESTION 100
You have a database availability group (DAG). The DAG is configured as shown in the following table.

You need to prevent a split-brain condition if a restore operation of the DAG occurs.
What should you do?

A.    Deploy an alternate witness server to each site.
B.    Modify the Datacenter Activation Coordination (DAC) mode.
C.    Set the quorum model of the cluster to Node and Disk Majority.
D.    Deploy another Mailbox server to Site2.

Answer: B
Explanation:
Datacenter Activation Coordination (DAC) mode is a property setting for a database availability group (DAG). DAC mode is disabled by default and should be enabled for all DAGs with two or more members that use continuous replication.
If a catastrophic failure occurs that affects the DAG (for example, a complete failure of one of the datacenters), DAC mode is used to control the startup database mount behavior of a DAG. When DAC mode isn’t enabled and a failure occurs that affects multiple servers in the DAG, and then when a majority of the DAG members are restored after the failure, the DAG will restart and attempt to mount databases. In a multi-datacenter configuration, this behavior could cause split brain syndrome, a condition that occurs when all networks fail, and DAG members can’t receive heartbeat signals from each other. Split brain syndrome can also occur when network connectivity is severed between datacenters. Split brain syndrome is prevented by always requiring a majority of the DAG members (and in the case of DAGs with an even number of members, the DAG’s witness server) to be available and interacting for the DAG to be operational. When a majority of the members are communicating, the DAG is said to have quorum.

If you want to pass Microsoft 70-342 exam successfully, donot missing to read latest lead2pass Microsoft 70-342 dumps.
If you can master all lead2pass questions you will able to pass 100% guaranteed.

http://www.lead2pass.com/70-342.html